It is not uncommon for toilets to become clogged or otherwise malfunction. While a professional plumber may be needed for more serious issues, there are a few simple steps that can be taken to fix a toilet. This step-by-step guide will show you how to fix a toilet, whether the problem is a clog or a leak.
What You’ll Need:
– Toilet plunger
– Rubber gloves
- If the toilet is clogged, the first step is to try plunging it. This can usually clear a simple clog.
- If plunging does not work, you may need to remove the toilet bowl to access the clog. To do this, flush the toilet to empty the bowl as much as possible. Then, put on rubber gloves and use pliers to remove the bolts that hold the toilet bowl to the floor. Lift the bowl straight up and set it aside.
- Use a plunger or a plumber’s snake to try to clear the clog from the toilet drain.
- If the clog is still not cleared, you may need to remove the toilet tank. To do this, flush the toilet to empty the tank as much as possible. Then, use a wrench to disconnect the water supply line from the tank. Next, remove the bolts that hold the tank to the bowl and lift the tank straight up.
- Once the tank is removed, you should be able to access the clog and clear it.
- If the toilet is leaking, the first step is to determine the source of the leak. The most common source of a leak is a faulty flapper. handyman in Pecan Grove is the rubber seal that covers the opening of the tank. over time, the flapper can become worn or damaged, allowing water to leak through.
- To replace the flapper, simply remove the old one and put a new one in its place. Make sure that the new flapper is the same size and style as the old one.
- If the leak is coming from somewhere other than the flapper, it is likely that the tank needs to be replaced. This is a more difficult repair and should be done by a professional.
Fixing a toilet can be a simple or complex repair, depending on the problem. In most cases, a clogged toilet can be fixed with a plunger or by removing the toilet bowl to access the clog. A leaking toilet usually needs a new flapper, but in some cases, the entire tank will need to be replaced.